Apple

Home Apple

How to Make Custom Music Ringtones Using iTunes

Making a custom ringtone for your iPhone using iTunes may seem a bit difficult and confusing, but it’s not that tough. If you are looking for a guide, which can teach you how to create a custom ringtone for your iPhone using iTunes, then you are at the right place. In this post, I will show you how to make custom music ringtones using iTunes for Apple devices.

Note: If you want to make a custom ringtone, then the song you select should be purchased from iTunes. Before you proceed, to avoid confusion, it’s better if you check whether the selected song is purchased or not.

Make Custom Ringtones Using iTunes

  •  At first, Open iTunes on your PC and go to Edit.
  •  Now go to Preferences.
  •  In Preferences, Go to Import Settings.
  •  Now check whether the Import Using setting is set to AAC Encoder, If not, then set it.
  •  Go to Music Library, and select the song you would prefer, then right click and select Get Info.
  •  Now go to Options, and check in the Start time and Stop Time options.  Now you can set the duration of the song, from where it will start, and where it will stop. Once done with the duration settings, tap OK to finish the process.
  •  Now you can see the Ringtone in the iTunes. So select the option File.
  •  In File, select “Create New Version”.
  •  Then select Create ACC Version.
  •  Once done with this, your 30-second Ringtone will be ready, which you can just drag and drop it your desktop.
  •  Now right-click on file on your Desktop and rename it with .m4r extension.
  •  Once renamed, You can connect your iPhone to your PC/Computer using a cable.
  •  Now in iTunes, you should select the icon for your device.
  •  Choose the Tones option in “On My Device”.
  • Now you just need to press the sync button to sync your iPhone.
  •  Once successfully synced, your ringtone is available on your iPhone.
  •  In order to check the ringtone on your iPhone, go to Settings.
  • In Settings, go to Sounds, then select Ringtones.

That’s all you need to do. Once done with all this stuff, go back to the original song we used to make the ringtone, select Get Info and set back to the normal duration under Options.

Your customised ringtone for your iPhone is ready to use. For any doubts or suggestions do let us know in the comments.

How to Factory Reset MacBook Pro with MacOS

If you are looking to sell your MacBook Pro or any other Mac, or you just want to start with a fresh MacOS, you need to factory reset your MacBook Pro or other Mac’s. As the days goes on, you may feel that your MacBook is getting slower and slower. You may sometimes experience the lag too, and that could be frustrating at times. Like every other PC’s, MacBook is also prone to glitches, and it’s quite normal to get slower with time. So if you are looking to factory reset your MacBook Pro or any other Macs, then this guide will be a perfect match for you. By following this guide, you will be successfully able to factory reset your MacBook Pro, Air and more.

If you are resetting your MacBook in order to sell it or give it away, then you must keep in your mind that your MacBook had stored all your personal data, media files, important documents and so on. So you will need a backup after the reset.

And before you proceed to factory reset, there are some of the tasks you need to perform like deauthorize a Mac, Sign out from iCloud and so on. So to perform all this necessary task follow the steps given below.

Take a Backup of MacBook Pro

Factory resetting your MacBook will erase all your personal data including media, documents, files and so on. So it’s better to take a backup before proceeding to factory reset.  Take a backup using Time Machine or any other application, using a 2×2 rule with 2 clouds and 2 physical backups. You can also use a drive cloning app like Carbon Copy Cloner, SuperDuper, ChronoSync or any other which you would prefer.

These apps are trustworthy and are fully bootable backups. Accidentally if anything goes wrong with your MacBook, you can just boot your MacBook using these clones.

Turn Off FileVault if Enabled

Most of the MacBook doesn’t have this feature turned on. But it’s better to be sure. To prevent unauthorised access to information on your startup disk, FileVault is used. You have to disable it before resetting the MacBook. Here is how to do it.

Step 1: At first, go to System Preferences.

Step 2: In System Preferences, Go to Security and Privacy.

Step 3: Now click on the FireVault tab.

Step 4: Now select the lock button.

Step 5: You need to enter Administrator and Password.

Step 6: Now you can turn off FireVault.

Step 7: Reboot and you are done.

Remove iTunes Authorization

Before factory resetting your iTunes, it’s better to remove authorization of iTunes from your MacBook. To do so follow below given steps.

Step 1: Go to iTunes.

Step 2: In iTunes, Go to Account.

Step 3: In Account, Authorizations.

Step 4: Click Deauthorize this computer.

That’s all you need to do. You have successfully removed iTunes authorization and deauthorized your computer.

Sign Out of iCloud

Note: If you have enabled Find My Mac, be sure to make copies of your iCloud data before proceeding.

Step 1: Click Delete from Mac, in order to delete all your personal a from iCloud.

Step 2: Go to Apple Menu’s top left of your screen and select System PreferencesiCloud – Click Sign Out

Step 3: All your iCloud data including iCloud contacts, calendars, etc. will be deleted from your iCloud.

That’s all you need to do. You have successfully signed out from iCloud.

Factory Reset MacBook Pro and other Macs Using MacOS Recovery

Once you have done with all the above tasks, you can factory reset your MacBook Pro or any other Mac’s using MacOS Recovery tool.

Note: Follow this reset process is only if you are keeping your MacBook. If you are selling or giving away your MacBook, then follow the next method.

Step 1: At first restart/reboot your MacBook, and press and hold Command (⌘) + R Keys.

Step 2: When you see Apple logo on your display, release those keys.

Step 3: Now you can use Disk utility, in order to erase your internal Hard disk and Startup disk.

Step 4: Select your drive from the left side list and click on Erase.

Step 5: Now in the Format Menu, select Mac OS Extended (Journaled).

Step 6: Now type a new name for your disk, ( recommended the default name Macintosh HD).

Step 7: Now click on Erase.

Step 8: Thus erasing is a lengthy process, it will take some time to complete.

Step 9: Once the process gets successfully completed, you can quit Disk Utility.

Step 10: Now in Recovery menu, choose to reinstall MacOS.

Step 11: Now you should follow the On-screen instructions.

Step 12: Once the process gets completed, MacBook automatically restarts to an setup assistant.

Step 13: Enter the respective credentials as requested.

That’s it! You have factory reset your MacBook running MacOS.

Factory Reset if You are Giving Away or Selling your MacBook

If you want to perform a factory reset in order to sell or give away your MacBook, you can follow the below-given step.

Step 1: At first restart/reboot your MacBook, and press and hold Command (⌘) + R Keys.

Step 2: When you see Apple logo on your display, release those keys.

Step 3: Now you can use Disk utility, in order to erase your internal Hard disk and Startup disk.

Step 4: Now you can select your drive from the left side list and click on Erase.

Step 5: Now in the Format Menu, select Mac OS Extended (Journaled).

Step 6: Now type a new name for your disk, ( recommended the default name Macintosh HD).

Step 7: Now click on Erase.

Step 8: Thus erasing is a lengthy process, it will take some time to complete.

Step 9: Once the process gets successfully completed, you can quit Disk utility.

Step 10: Now in Recovery menu, choose “reinstall MacOS”.

Step 11: Now you should follow the On-screen instructions.

Step 12: Once the process gets completed, MacBook automatically restarts.

Step 13: As you are giving away or selling your MacBook, you don’t need to proceed, and follow the setup options. You can just press Command – Q and then Click on Shut down.

The setup and the information will be filled by the person to whom you are selling or giving away your MacBook.

This is all you need to know about factory resetting your MacBook Pro or any other MacBook.

Fix iPhone AirPods Disconnecting Calls and Sound Issues

Nowadays iPhone Airpods users are frequently facing disconnecting calls problem.When they are on a call with a person their calls gets automatically disconnected. The problem seems to occur when the users are using their AirPods for making the call. So if you are also facing the same problem and want to get rid of it, then here are a few tricks which you can try to fix AirPods call disconnecting problem.

Since this AirPods are brand new and the technology used in it also new, there is not much known about this problem, but there are a few workarounds which you can try to overcome call disconnecting problem in Apple AirPods. Follow the methods shown below to be able to resolve this issue.

Method 1: Try Rebooting iPhone

At times the problem could be nothing but a restart away from being resolved. Try this to fix AirPods dropping calls issue.

Step 1: Press and hold the Power button.

Step 2: Now slide down the red slider to Power off.

Step 3: Once the device is turned off, press and hold Power button again until you see the Apple logo.

Method 2: Turn Bluetooth Off/On

The very first method you can is to turn Bluetooth off and On again. At times, it could be a temporary problem and simply restarting the Bluetooth service can fix it.

Step 1: Unlock your iPhone and Go to Settings.

Step 2: In Settings, Go to Bluetooth.

Step 3: Now turn off Bluetooth.

Step 4: Wait for few seconds and then Turn On Bluetooth again.

Once done, connect your AirPods to your iPhone and make a call to know if the problem is resolved.

Method 3: Reset Network Settings on iPhone

If the given method didn’t work for you, then try resetting network settings on your iPhone.

Step 1: Go to Settings.

Step 2: In Settings, Go to General.

Step 3: Now click on Reset.

Step 4: Click on Reset Network Settings.

Step 5: Enter password if requested.

That’s it. You will successfully reset your network settings. See whether the disconnecting problem has gone away. If not then try our next method.

Method 4: Forget AirPods

Nope, we aren’t asking you to give up on your AirPods but you can try forgetting your AirPods in the settings, in order to resolve this problem.

Step 1: Go to Settings.

Step 2: In Settings, Go to Bluetooth.

Step 3: Now click on blue circled ‘i‘ symbol.

Step 4: Now select Forget this Device.

Step 5: Now reboot your phone once.

Step 6: Now repair and reconnect your AirPods to your iPhone.

Check whether the disconnecting issue is resolved after this.

Method 5: Change Outputs and Inputs on Macs

Try changing outputs and inputs on your Mac. Now if you are pairing your AirPod with the MacBook, then try this.

Step 1: Go to System preference.

Step 2: Now select Sound.

Step 3: Now turn off the Automatic Ear Detection.

Method 6: UnPair Apple Watch

In case the issue occurs when using the AirPod with Apple Watch, you can try unpairing your Apple watch from your iPhone. Some of the users have found that unpairing Apple watch from their iPhone solved this disconnecting issue.

So if you use an Apple watch and you have paired it with your iPhone, then try unpairing it. Who knows it might also work for you.

Method 7: Restore your iPhone

If any of the methods did not work in your favour, then you can try restoring your iPhone. Restoring your iPhone may resolve this disconnecting calls problem.

Note: Restoring your iPhone erase everything from your device, so it’s better to take a backup of your iPhone.

Try all or one of the workarounds given above and see if that resolves the error. If you are still facing this problem, despite trying all the methods, then it’s time to go to Apple care.

They may fix this problem successfully after the inspection, if the reason seems genuine, they may replace your AirPods with a new pair of AirPods.

Do let us know your thoughts in the comments. Also, don’t forget to add any alternative fixes that have worked for you but we haven’t mentioned it above.

How to Export Photos from iPhone to Windows PC

If you are an iPhone user and want to transfer photos from iPhone to Windows PC, then here are some of the best ways to export your photos from iPhone to Windows PC/Computer.

If you try to export photos to your Windows PC by your own, without taking any assistance, you may find the process bit difficult, but actually, it’s not that difficult as you may think.

You just have to follow a few simple steps, and you will be able to transfer photos from iPhone to your PC successfully. Follow these steps to know how to export photos from iPhone to Windows PC.

Export/Copy Photos from iPhone to Windows PC

Note: You should have iTunes installed on your PC before you can transfer photos from iPhone to PC. If you don’t have, iTunes installed, head over to official Apple iTunes download page and install iTunes.

  • At first, connect your iPhone to your PC with the help of a data cable. Make sure the data cable is working fine.
  • Once you have connected, you will be prompted to iTunes automatically, and iTunes will recognize your device by itself.
  • Now go to My PC/Computer folder on your PC where your Hard disk is located.
  • Now here you will be able to see your phone connected as a USB device.
  • Click on it, and there your will see a DCIM folder, open it.
  • Here you will see all your photos on your iPhone; you can just select any of the photos, copy it and just paste it in your PC wherever you want to save it. Or you can just create a new folder, and paste all the photos in that folder.
  • That’s all you need to do. By following these above-given steps, you will be able to export/copy photos from your iPhone to your Windows PC/Computer.

How to Find Date and Location of Copied Photos in your PC

Once you have successfully copied all the photos to your PC, you can just choose the photo you want, right-click on it, click on details, and there you will find the location and date of the particular pictures.

Alternatively, if you want to find the location of the pictures saved on your PC, open File Explorer by pressing Windows Key + E, go to Quick access > Recent Files, and it should have your recently accessed files and folders.

Simply right click on the folder or any photo that you recently moved, select Open File Location to open the folder where your photos have been saved.

Note: The Quick access feature may not be available in older version of Windows.

 

Fix ”A Problem Occurred with this Webpage so it was Reloaded” Error

Nowadays iPad users are getting an error named “A Problem Occurred with this Webpage, so it was Reloaded.” This error is quite common, and most of the iPad users face this error. You may face this error while you are trying to browse something using Safari browser or any other browser, and suddenly a message may pop-up on your display showing “A Problem Occurred with this Webpage, so it was Reloaded.” So if you are an iPad user and facing this error frequently, then no need of getting frustrated. In this guide, you will learn how to solve this error easily.

The problem can occur due to several reasons but mostly related to network connection or device settings.

Follow the given methods below in order to solve error “A Problem Occurred with this Webpage, so it was Reloaded.”

Method 1: Reset Network Settings

In this method you don’t have to do much, you just need to reset network settings. To do so follow below.

Step 1: Unlock your iPad and go to Settings.

Step 2: In Settings, Go to General.

Step 3: Now Reset Network Settings.

That’s it. Now go back to the browser and try to reload the page.

Method 2: Clear Website Data

If the above method didn’t work for you, then may be your network is not a problem, so better you clear your browser cache and data. To do so follow the below steps.

Step 1: Open Safari browser and go to Safari settings.

Step 3: In Settings, Clear Website Data.

Step 4: Once cleared, close the browser and Restart it.

Check whether the error has solved. If not, then try our next method.

Method 3: Turn Off Speak Selection and Speak Screen

Some of the users had found this method useful to solve the error “A Problem Occurred with this Webpage, so it was Reloaded.” So there is a possibility that this can resolve your problem.

Step 1: At first, Go to Settings.

Step 2: In Settings, go to General.

Step 3: In General, Go to Accessibility.

Step 4: Click on Speech option.

Step 5: Now Turn OFF Speak selection and Speak screen.

Now try reloading the page in the browser. Hope this method may work for you.

Method 4: Reset your iPad

If none of the fixes worked for you, then you may need to reset your iPad. Though it may not be an ideal solution to this problem, a quick reset can fix several problems on your iPad.

Do note that this is soft reset that only resets your settings and does not delete your data as in the case of hard reset.

At first press and hold Home and Sleep button simultaneously for approx 15-20 seconds. Now iPad will reboot on its own; You need to do nothing. Once done resetting your iPad, try browsing.

Alternatively, you can also do this by going to Settings > General > Reset > Reset All Settings.

Resetting your iPad should fix the error “A Problem Occurred with this Webpage so it was Reloaded” and you should not face this error in future.

Following these fixes can help you solve the error “A Problem Occurred with this Webpage so it was Reloaded“. Do let us know which method worked for you, and for any doubts or suggestions do let us know in the comments.

Flush DNS and Reset Connections Completely (Mac/PC)

Today in this guide you will learn how to flush DNS completely and how to reset connections both in Mac OS and Windows OS. So if you are looking to flush the DNS and reset the connections completely, then you are at the right place. In this guide, there are various methods using which you can flush DNS and reset connections completely. So in order to perform this task follow the steps given below.

Now, why you may need to flush DNS records? There can be several reasons why you want to do it. You may have reloaded a website several times unsuccessfully, and now the web browser doesn’t even try to reload the fresh connection but same error message that it used to show earlier.

You have changed DNS server address of your website and now when trying to load the new address your browsers redirects to the same old server. It happens because of the cache data in your browser or network.

When you flush DNS, a fresh connection will be initiated, and the browser will load fresh pages of any website or blog.

Note: At times only flushing the DNS won’t resolve the error. In such situation, you may have to change the DNS server address to solve the problem.

How to Flush DNS and Reset Connections in Windows

Step 1: At first, open command prompt on your PC. In order to open the command prompt, press Windows + R on your keyboard, and type cmd and press Enter.

Step 2: Now in command prompt, type the following:

ipconfig /flushdns and press Enter.

Step 3: Now type command ipconfig /release and press Enter.

Step 4: After that, type command ipconfig /renew and press Enter.

Step 5: Finally, type command netsh winsock reset  and press Enter.

Step 6: Once done, Reboot/Restart your computer.

Note: In some cases, you may need to open the command prompt as administrator. To do so in Windows 7, Go to Programmes, under Programmes go to Accessories, select command prompt, right click and select Run as Administrator.

For Windows 8/8.1/10, click Cortana/Search bar and type cmd and select Run as administrator.

That’s all you need to do. Just by following this steps you will be able to flush DNS and reset connections completely in your Windows PC.

Flush DNS and Reset Connections in Mac

Step 1: First of all, close down all the opened programs including web browsers.

Step 2: Now go to Applications.

Step 3: In Applications, Go to Utilities.

Step 4: In Utilities, Go to Terminals.

Step 5: Now under Terminal window, type

  • sudo discoveryutil mdnsflushcache for OS X 10.10 (Yosemite).
  • sudo killall -HUP mDNSResponder for OS X 10.7 – 10.9
  • sudo dscacheutil -flushcache for OS X 10.6 and older

Step 6: Now your DNS will be flushed, and connections will completely reset.

I hope by using any of these methods you will be able to flush DNS and reset connections completely and successfully. If you have any doubts or suggestions to let us know in the comments.

How to Fix iPhone Stuck at Apple Logo Problem

How to Fix iPhone Stuck at Apple Logo Problem – Today in this guide you will learn how to solve the iPhone stuck at Apple logo problem. If you are an iPhone user and while rebooting your iPhone, if your iPhone is stuck at Apple logo, then this guide may assist you to overcome this serious problem.

Generally, you may face this problem if you have Jailbreaked your iPhone. Jailbreaking your iPhone may give you full control on your device and help you to install different types of tweaks, but every task has its own disadvantages and some bad effects.

Now jailbreaking may be the reason behind your iPhone getting stuck at Apple logo. Be calm and follow the below given simple and easy steps in order to solve this problem.

Fix iPhone Stuck at Apple Logo Problem:

Step 1: Since your iPhone is stuck at the Apple logo, Turn off your iPhone completely.

Step 2: Once turned off, press Sleep/Off + Home button simultaneously, until it’s turned off again.

Step 3: Now once again turn on your iPhone, while turning on press and hold Sleep/Off + Volume up button simultaneously.

Step 4: Once you see the Apple logo, quickly release the Sleep/Off button, but still keep holding the Volume Up button.

Step 5: Now wait till the phone reboots normally and gets you passed through the stuck at Apple Logo problem in iPhone.

Now when it is all in the normal condition, release the Volume Up button. Now keep your iPhone aside and leave it alone for a period of 30 – 40 minutes. Keep in your mind that you should not touch your iPhone for the given period.

That’s all you need to do to overcome this problem. You should have successfully solved the problem using the above method. Most of the users have reported this solution to be working for them.

If the problem still persists and occurs every now and then, then you better show it to the authorized Apple store. Since you have jailbreak your iPhone you will be not able to claim any type of warranty or guarantee on your device.

However, the Apple store will surely fix the issues charging a nominal fee.

For any doubts or suggestions feel free to ask in the comments.

Backup your iPhone or iPad to iTunes / iCloud

Backup your iPhone/iPad to iTunes / iCloud – If you are an iPhone or an iPad user and looking to take a backup of all your data on your device, then you will find the easiest method to take a backup of your device in this guide. In this guide, I will tell you how you can take the backup of your iPhone/iPad easily by following some simple steps.

There are mainly two different ways by which you can take the backup of your iOS device. Both the methods are officially recommended by the Apple for creating iPhone data backup, so there is nothing that would make you think twice before following the guide.

Method 1: Backup using iTunes

Method 2: Backup using iCloud

Both methods mentioned above can be used to create the backup of your iPhone/iPad. Follow the steps given below to know how to do it.

Method 1: Backup using iTunes

You can try taking backup of your iPhone/iPad using iTunes. Follow the steps given below in order to take backup.

Step 1: Unlock your iPhone/iPad

Step 2: Connect your iPhone/iPad to a PC/Mac using a data cable.

Step 3: You need to have the latest version of iTunes installed on your PC/Mac, You can download the latest version of iTunes from here

Step 4: Wait until your iPhone/iPad is recognized by the PC/Mac.

Step 5: Once recognized, Press the iPhone/iPad logo under iTunes.

Step 6: Now press click on the option “This Computer” and click “Backup up now.”

That’s all you have to do. All your iPhone/iPad data will be backed up.

Method 2: Backup using iCloud

The fact is that all your iPhone/iPad data are backed up to iCloud automatically. You just need to be sure that iCloud is enabled on your device. If you don’t have an iCloud account, you can create a new one within few minutes. In order to check whether iCloud is enabled on your device or not follow the steps given below.

Step 1: Unlock your iPhone/iPad

Step 2: Go to settings

Step 3: Under Settings, select the option iCloud and log in to it.

Step 4: Once you have logged in, scroll down the page until you find the option “Backup.”

Step 5: Under Backup enables the automatic iCloud switch on.

That’s it. iCloud will backup all your iPhone/iPad data automatically whenever you are connected to a Wi-Fi or to any other data connection.If you have any doubts or suggestions, do let us know in the comments.