Apple

Home Apple

Fix iPhone AirPods Disconnecting Calls and Sound Issues

Nowadays iPhone Airpods users are frequently facing disconnecting calls problem.When they are on a call with a person their calls gets automatically disconnected. The problem seems to occur when the users are using their AirPods for making the call. So if you are also facing the same problem and want to get rid of it, then here are a few tricks which you can try to fix AirPods call disconnecting problem.

Since this AirPods are brand new and the technology used in it also new, there is not much known about this problem, but there are a few workarounds which you can try to overcome call disconnecting problem in Apple AirPods. Follow the methods shown below to be able to resolve this issue.

Method 1: Try Rebooting iPhone

At times the problem could be nothing but a restart away from being resolved. Try this to fix AirPods dropping calls issue.

Step 1: Press and hold the Power button.

Step 2: Now slide down the red slider to Power off.

Step 3: Once the device is turned off, press and hold Power button again until you see the Apple logo.

Method 2: Turn Bluetooth Off/On

The very first method you can is to turn Bluetooth off and On again. At times, it could be a temporary problem and simply restarting the Bluetooth service can fix it.

Step 1: Unlock your iPhone and Go to Settings.

Step 2: In Settings, Go to Bluetooth.

Step 3: Now turn off Bluetooth.

Step 4: Wait for few seconds and then Turn On Bluetooth again.

Once done, connect your AirPods to your iPhone and make a call to know if the problem is resolved.

Method 3: Reset Network Settings on iPhone

If the given method didn’t work for you, then try resetting network settings on your iPhone.

Step 1: Go to Settings.

Step 2: In Settings, Go to General.

Step 3: Now click on Reset.

Step 4: Click on Reset Network Settings.

Step 5: Enter password if requested.

That’s it. You will successfully reset your network settings. See whether the disconnecting problem has gone away. If not then try our next method.

Method 4: Forget AirPods

Nope, we aren’t asking you to give up on your AirPods but you can try forgetting your AirPods in the settings, in order to resolve this problem.

Step 1: Go to Settings.

Step 2: In Settings, Go to Bluetooth.

Step 3: Now click on blue circled ‘i‘ symbol.

Step 4: Now select Forget this Device.

Step 5: Now reboot your phone once.

Step 6: Now repair and reconnect your AirPods to your iPhone.

Check whether the disconnecting issue is resolved after this.

Method 5: Change Outputs and Inputs on Macs

Try changing outputs and inputs on your Mac. Now if you are pairing your AirPod with the MacBook, then try this.

Step 1: Go to System preference.

Step 2: Now select Sound.

Step 3: Now turn off the Automatic Ear Detection.

Method 6: UnPair Apple Watch

In case the issue occurs when using the AirPod with Apple Watch, you can try unpairing your Apple watch from your iPhone. Some of the users have found that unpairing Apple watch from their iPhone solved this disconnecting issue.

So if you use an Apple watch and you have paired it with your iPhone, then try unpairing it. Who knows it might also work for you.

Method 7: Restore your iPhone

If any of the methods did not work in your favour, then you can try restoring your iPhone. Restoring your iPhone may resolve this disconnecting calls problem.

Note: Restoring your iPhone erase everything from your device, so it’s better to take a backup of your iPhone.

Try all or one of the workarounds given above and see if that resolves the error. If you are still facing this problem, despite trying all the methods, then it’s time to go to Apple care.

They may fix this problem successfully after the inspection, if the reason seems genuine, they may replace your AirPods with a new pair of AirPods.

Do let us know your thoughts in the comments. Also, don’t forget to add any alternative fixes that have worked for you but we haven’t mentioned it above.

Find and Remove Duplicates in iTunes

If you are also one of those iTunes users looking for a guide which will assist you step by step to find and remove duplicate audio files from your iTunes library then you are at the right place. The existence of duplicate audio files not only consume your iTunes storage but also makes your device a bit heavy in terms of performance. Playing same audio again and again due to duplicate files may be frustrating to many of its users so it’s better to delete duplicate files in iTunes. T

The below given method should work on macOS Sierra and older versions. So in order to remove duplicate files from iTunes follow the below given method.

Use iTunes Settings to Remove Duplicate Files in iTunes

  1. First, go to iTunes.
  2. Now go to Files.
  3. Under Files, click on Library.
  4. Now you will see an option written “show duplicate items” click on it.
  5. You will see the list of all duplicate audio files in your Library, you can just right click on any files and delete it.

So this is how you can delete duplicate audio files from iTunes using iTunes settings.

How to Disable Import of Duplicate Songs

You only need to delete duplicate files if they exist. If you can stop duplicates files from being added to the iTunes,  no need of deleting as well. Here is how to do it.

  1. Firstly open iTunes and go to Preferences.
  2. In Preferences, go to Advanced tab.
  3. Now you will see options Keep iTunes Media folder organised” and Copy files to iTunes Media folder when adding to library”, make sure you have checked on both of them.
  4. Once done, click on the Reset Warning option to save the settings.
  5. So this is how you can easily disable import of duplicate songs.

How to Remove Duplicate Files in iTunes using Third Party Software

To make your task easier you can also use third party software to remove duplicate audio files from your iTunes library. There are lots of removal software available in the store, and one of the best of those is “Tune Sweeper 4″.

This software will help you to find the duplicate audio files easily and will also remove it. Other than removing, this software also offers some other cool features and it is available to buy for an amount of $12.99.

So these were the methods to find and remove duplicate files in your iTunes. If you are looking for any specific guide that we haven’t covered, then use our Contact us form and we shall try to create a tutorial for the problem.

How to Make Custom Music Ringtones Using iTunes

Making a custom ringtone for your iPhone using iTunes may seem a bit difficult and confusing, but it’s not that tough. If you are looking for a guide, which can teach you how to create a custom ringtone for your iPhone using iTunes, then you are at the right place. In this post, I will show you how to make custom music ringtones using iTunes for Apple devices.

Note: If you want to make a custom ringtone, then the song you select should be purchased from iTunes. Before you proceed, to avoid confusion, it’s better if you check whether the selected song is purchased or not.

Make Custom Ringtones Using iTunes

  •  At first, Open iTunes on your PC and go to Edit.
  •  Now go to Preferences.
  •  In Preferences, Go to Import Settings.
  •  Now check whether the Import Using setting is set to AAC Encoder, If not, then set it.
  •  Go to Music Library, and select the song you would prefer, then right click and select Get Info.
  •  Now go to Options, and check in the Start time and Stop Time options.  Now you can set the duration of the song, from where it will start, and where it will stop. Once done with the duration settings, tap OK to finish the process.
  •  Now you can see the Ringtone in the iTunes. So select the option File.
  •  In File, select “Create New Version”.
  •  Then select Create ACC Version.
  •  Once done with this, your 30-second Ringtone will be ready, which you can just drag and drop it your desktop.
  •  Now right-click on file on your Desktop and rename it with .m4r extension.
  •  Once renamed, You can connect your iPhone to your PC/Computer using a cable.
  •  Now in iTunes, you should select the icon for your device.
  •  Choose the Tones option in “On My Device”.
  • Now you just need to press the sync button to sync your iPhone.
  •  Once successfully synced, your ringtone is available on your iPhone.
  •  In order to check the ringtone on your iPhone, go to Settings.
  • In Settings, go to Sounds, then select Ringtones.

That’s all you need to do. Once done with all this stuff, go back to the original song we used to make the ringtone, select Get Info and set back to the normal duration under Options.

Your customised ringtone for your iPhone is ready to use. For any doubts or suggestions do let us know in the comments.

Backup your iPhone or iPad to iTunes / iCloud

Backup your iPhone/iPad to iTunes / iCloud – If you are an iPhone or an iPad user and looking to take a backup of all your data on your device, then you will find the easiest method to take a backup of your device in this guide. In this guide, I will tell you how you can take the backup of your iPhone/iPad easily by following some simple steps.

There are mainly two different ways by which you can take the backup of your iOS device. Both the methods are officially recommended by the Apple for creating iPhone data backup, so there is nothing that would make you think twice before following the guide.

Method 1: Backup using iTunes

Method 2: Backup using iCloud

Both methods mentioned above can be used to create the backup of your iPhone/iPad. Follow the steps given below to know how to do it.

Method 1: Backup using iTunes

You can try taking backup of your iPhone/iPad using iTunes. Follow the steps given below in order to take backup.

Step 1: Unlock your iPhone/iPad

Step 2: Connect your iPhone/iPad to a PC/Mac using a data cable.

Step 3: You need to have the latest version of iTunes installed on your PC/Mac, You can download the latest version of iTunes from here

Step 4: Wait until your iPhone/iPad is recognized by the PC/Mac.

Step 5: Once recognized, Press the iPhone/iPad logo under iTunes.

Step 6: Now press click on the option “This Computer” and click “Backup up now.”

That’s all you have to do. All your iPhone/iPad data will be backed up.

Method 2: Backup using iCloud

The fact is that all your iPhone/iPad data are backed up to iCloud automatically. You just need to be sure that iCloud is enabled on your device. If you don’t have an iCloud account, you can create a new one within few minutes. In order to check whether iCloud is enabled on your device or not follow the steps given below.

Step 1: Unlock your iPhone/iPad

Step 2: Go to settings

Step 3: Under Settings, select the option iCloud and log in to it.

Step 4: Once you have logged in, scroll down the page until you find the option “Backup.”

Step 5: Under Backup enables the automatic iCloud switch on.

That’s it. iCloud will backup all your iPhone/iPad data automatically whenever you are connected to a Wi-Fi or to any other data connection.If you have any doubts or suggestions, do let us know in the comments.

 

How to Fix ”This iPhone is already activated. You may disconnect this iPhone now”

Recently many of the iPhone users have reported that they are frequently facing an error message ”This iPhone is already activated. You may disconnect this iPhone now” when they try to connect their iPhone to their PC/Mac. Are you facing a similar problem? Do not worry as we have the fix for this problem.

What happens is that when you try to connect restored iPhone to PC or Mac you get this error. This error may also occur even if you haven’t restored your iPhone. Due to this message, the iPhone users can’t proceed further while connecting the iPhone to PC/Mac, thus they also can’t sync their iPhone to their PC/Mac.

If you are facing the same problem and want to get rid of it then here is a simple and easy method to fix this problem. Follow the steps given below in order to fix ”This iPhone is already activated. You may disconnect this iPhone now” iPhone problem.

The solution to this problem is to turn off activation only Mode in iTunes. Here is how to turn off activation only Mode to fix this problem.

For Mac Users

These following steps are for Mac users only, if you are a Windows user then follow the next method mentioned below.

First of all, disconnect your iPhone from your PC and close the iTunes.

Now with the help of the Finder, Click on Go.

In Go, Select Utilities.

Now in Utilities, Go to Terminal.

Now type the following command and press Enter.

defaults delete com.apple.iTunes StoreActivationMode

Once you have executed the command, try to connect your iPhone to Mac and see if this has fixed the issue.

For Windows Users

These steps are only for Windows users. So, if you are a Mac user follow the instructions mentioned above.

First of all close iTunes. Make sure you save any changes.

Press and Hold the Windows Key and then press the R key to open Run Dialog Box.

Now type the following commands and press  Enter.

For 32-bit version of Windows, type:

C:\Program Files\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 0

For 64-bit version of Windows, type:

C:\Program Files (x86)\iTunes\iTunes.exe" /setPrefInt StoreActivationMode 0

That’s all you need to do. By performing the above-given steps correctly you will be able to solve the problem ”This iPhone is already activated. You may disconnect this iPhone now”. In order to check once again try to connect your iPhone to your PC/Mac using a data cable.

The error is not new to iPhone devices but solutions seem to work with every version of iPhone including the latest iPhone 7, 7+ and the iPhone 6 and 6+.

Do let us know if you were able to fix the problem using the above-given solution. If you have any alternate fix then share it as well.

 

Fix Common Apple AirPods Problems

Apple ditched the headphone jack on its new line of iPhone and introduced Apple AirPods, new wireless earphones that are good for music, taking calls and of course using Siri. This is all good until AirPods stops working or starts facing minor yet annoying problems. Is your AirPods not working properly as well? Don’t worry; you are not alone. Continue reading as we tell you how to fix common Apple AirPods problems with a step by step guide.

There are several AirPods problems and the most common AirPods problem being AirPods not charging issue, won’t connect to iPhone and Mac, automatic ear detection not working, glitchy play and pause, Airpods disconnecting calls and other issues to name a few. Some of these problems can be fixed by resetting the Apple AirPods. However, if that doesn’t work you, we have other solutions as well.


Reset Apple AirPods

Resetting Apple AirPods is nothing like resetting your iPhone. When a user resets the AirPods, he is only resetting the AirPods to its factory state. Since the user is not losing any data because there is nothing to lose, one only needs to re-pair AirPods with their iPhone and Mac to get it to work again.

Here is how to reset Apple AirPods to fix common problems.

  1. Place both the AirPods (Righ/Left) in the AirPods charging case.
  2. At the back of the case, look for a button. Press and hold the button for 15 seconds. Release the button when the LED flashes.
  3. Remove AirPods from the case and pair it with your iPhone / Mac.

Still not working? Proceed with other Apple AirPods fixes listed below.


Automatic Ear Detection Not Working

Apple AirPods come with proximity sensors that detect when the user inserts or removes the AirPods from their ears. Based on the input, AirPods will either play the music or pause it. In case, Automatic Ear Detection is not working, make sure Automatic Ear Detection is turned on in the Settings.

  1. Go to Settings.
  2. Open Bluetooth.
  3. Tap Airpods and tap on i next to the paired AirPods.
  4. Enable Automatic Ear Detection by tapping the slider.

AirPods Play/Pause Music Abruptly.

Apple AirPods comes with proximity sensors integrated that helps the device detect if the user is using inserting the AirPods into ears or removing them. Based on the input, AirPods will resume or pause the music.

However, if your AirPods are not working as it should and pausing/playing music abruptly, you may need to check the proximity sensor for the problems.

The proximity sensors don’t work if dust or skin care products cover the sensors resulting in malfunctioning of the AirPods. To fix the problem, do the following.

1. Clean AirPods with a cleaning cloth with some isopropyl alcohol like the Cleanmax etc.

2. Reset AirPods once again after cleaning.

3. Disable and enable Automatic Ear Detection from Settings > Bluetooth > AirPods > i.

4. If you think the problem is hardware related, take the AirPods to Apple Support.


AirPods Battery Drain Issue

Some users have reported battery drain issues with their AirPods. Apple AirPods offer some best in class battery life. However, the battery draining issue is real. Here are a couple of solutions to fix AirPods battery draining issue.

1. Reset – As explained earlier, resetting AirPods seems to have solved the battery draining issue for AirPods.

Put the AirPods into the charging case. Press and hold the button located at the back of charging case for 15 seconds. Release the button when the LED flashes. Pair the AirPods again and make sure to enable features like Auto Ear Detection.

2. Completely Drain and Recharge AirPods

Another way to fix the battery draining issue is to let the AirPods battery drain completely to 0. Put the AirPods back in the charging case and allow it to charge till %100 capacity.

3. Unpair and Pair AirPods

You can also try to unpair and re-pair the AirPods to fix the battery draining issue. This may not look like a solution but supposedly has worked for some users.

  1. Go to Settings > Bluetooth > My devices.
  2. Tap the i button and then select Forget this Device.
  3. Tap on Forget Device to confirm.

Once done, pair the AirPods again with your iPhone and see if it resolves the battery draining issue.

4. Enable Auto Ear Detection

The Auto Ear Detection feature in AirPods automatically pauses and plays the music whenever the user inserts or removes the AirPods from the ears. For those that facing battery draining issue can leave Auto Ear Detection enabled for AirPods in settings to reduce the battery consumption.

  1. Open Settings and go to Bluetooth > AirPods.
  2. Tap the i button and disable/enable Auto Ear Detection option.

5. Replace AirPods Battery

AirPods run on lithium-ion batteries so is the charging case. In the long run, the AirPods battery starts to give less battery life. Apple does offer battery replacement for both AirPods and charging case starting at $49 each. When under warranty, the service centre might replace it free of charge. Check Apple AirPod service page for more.


AirPods Won’t Connect to MacBook

If you use AirPods with your Mac, you may face connection error. Older MacBooks had unreliable Bluetooth hardware which might be causing the AirPods connection issues.

Here are a couple of solutions to fix AirPods issue with Mac.

1. Turn On/Off Bluetooth – On your Mac, click the Bluetooth icon and turn off Bluetooth. Wait for a few minutes and turn on Bluetooth from the menu bar. Try pairing AirPods with Mac again.

2. Restart Bluetooth Process in Mac – Killing and restarting the Bluetooth process in Mac can also help you fix the AirPods not working with Mac issue. Restart Bluetooth process in Mac is easy.

Open the Terminal window and type:

sudo pkill blued

Hit enter. Enter the password and hit enter again.

The command will kill and restart the Bluetooth process in Mac. Try connecting to the AirPods again to see how it works now.


AirPods Won’t Connect to iPhone / iPad

The AirPods not working issue can also occur with iPhone and iPad. However, you cannot kill the Bluetooth process in iPad and iPhone, so here are a couple of solutions to fix the problem.

1. Turn on / Off Bluetooth – Start by turning off Bluetooth. Wait for a few seconds and turn on Bluetooth. Try connecting again.

2. Unpair – Try unpairing the AirPods from iPhone.
Go to Settings > Bluetooth > My Devices.

3. Next, tap the i button. Tap on AirPods and select Forget this device. Tap Forget Device once more to unpair.

Turn on Bluetooth on iPhone and search for Bluetooth device. Select AirPod from the list to start the pairing process.


Find Stolen / Lost AirPods

AirPods like iPhone can be located when stolen or misplaced using Find iPhone feature. Users can track the AirPods last known location and current location depending on the status, through Find iPhone interface.

  1. Open Safari and go to iCloud.com.
  2. Sign in with your Apple ID.
  3. Click on Find iPhone. Click All Devices drop-down menu.
  4. Select your AirPods from the list and location of AirPods will be shown on the map.
  5. If it is nearby, click Play Sound option and the AirPods will start beeping.

The AirPods’s current location is trackable only if the AirPods is powered on. In case of discharged AirPods, the users can only find the last known location of the earphones.

Fix ”A Problem Occurred with this Webpage so it was Reloaded” Error

Nowadays iPad users are getting an error named “A Problem Occurred with this Webpage, so it was Reloaded.” This error is quite common, and most of the iPad users face this error. You may face this error while you are trying to browse something using Safari browser or any other browser, and suddenly a message may pop-up on your display showing “A Problem Occurred with this Webpage, so it was Reloaded.” So if you are an iPad user and facing this error frequently, then no need of getting frustrated. In this guide, you will learn how to solve this error easily.

The problem can occur due to several reasons but mostly related to network connection or device settings.

Follow the given methods below in order to solve error “A Problem Occurred with this Webpage, so it was Reloaded.”

Method 1: Reset Network Settings

In this method you don’t have to do much, you just need to reset network settings. To do so follow below.

Step 1: Unlock your iPad and go to Settings.

Step 2: In Settings, Go to General.

Step 3: Now Reset Network Settings.

That’s it. Now go back to the browser and try to reload the page.

Method 2: Clear Website Data

If the above method didn’t work for you, then may be your network is not a problem, so better you clear your browser cache and data. To do so follow the below steps.

Step 1: Open Safari browser and go to Safari settings.

Step 3: In Settings, Clear Website Data.

Step 4: Once cleared, close the browser and Restart it.

Check whether the error has solved. If not, then try our next method.

Method 3: Turn Off Speak Selection and Speak Screen

Some of the users had found this method useful to solve the error “A Problem Occurred with this Webpage, so it was Reloaded.” So there is a possibility that this can resolve your problem.

Step 1: At first, Go to Settings.

Step 2: In Settings, go to General.

Step 3: In General, Go to Accessibility.

Step 4: Click on Speech option.

Step 5: Now Turn OFF Speak selection and Speak screen.

Now try reloading the page in the browser. Hope this method may work for you.

Method 4: Reset your iPad

If none of the fixes worked for you, then you may need to reset your iPad. Though it may not be an ideal solution to this problem, a quick reset can fix several problems on your iPad.

Do note that this is soft reset that only resets your settings and does not delete your data as in the case of hard reset.

At first press and hold Home and Sleep button simultaneously for approx 15-20 seconds. Now iPad will reboot on its own; You need to do nothing. Once done resetting your iPad, try browsing.

Alternatively, you can also do this by going to Settings > General > Reset > Reset All Settings.

Resetting your iPad should fix the error “A Problem Occurred with this Webpage so it was Reloaded” and you should not face this error in future.

Following these fixes can help you solve the error “A Problem Occurred with this Webpage so it was Reloaded“. Do let us know which method worked for you, and for any doubts or suggestions do let us know in the comments.

How to Show/Hide Hidden Files and Folders on MacOS

Apple always tries to keep things simple for its Mac users. There are various types of hidden files and folders on your Mac, but you are unaware of it. If you are looking for a guide which will show you how to show the hidden files and folders on your Mac, then this guide is the only thing you need to follow. In this guide, you will learn how to show/hide hidden folders on your Mac easily using command and by following some simple steps.

Show Hidden Files and Folders on your Mac

First of all, you will learn how to show or reveal all the hidden file and folders on your Mac. To do so follow the steps given below.

At First with the help of the Finder, open Go.

Now in Go, Select Utilities.

Now in Utilities, select “Terminal” option.

Now execute the following command and then press Enter.

defaults write com.apple.finder AppleShowAllFiles yes

Now again type the following command and press enter.

killall finder

That’s it. All hidden files and folders on your Mac’s are now visible.

What the above command does is that it makes your Mac display all the files including the hidden files to the user. That is all you need to do to view hidden files in Mac.

Hide Files and Folders on your Mac

Now you will be thinking how to hide these files and folders which you had revealed before. In order to do so, Follow the steps given below.

At first, go to Finder and then Open Go.

Now In Go, Open Utilities.

In Utilities, Go to Terminals.

Now type the following command and press Enter.

defaults write com.apple.finder AppleShowAllFiles no

Once done, type the following command and then press Enter.

killall finder

Type in the correct command mentioned above, if not typed properly, then this might not work for you.

This is all you need to do to Show/Hide Hidden Files and Folders on MacOS. If you have any doubts or suggestions do let us know in the comments.